作业帮解释下激光切割程序%X2040D_SUB_V9.0.1 ,MX-O,; LASER :CP ROFIN PRC; DATE :SEP-09-2011;;(SUB 11)(P289=GS51)G5M16G90G0Z0(IF P289 NE 1 RET)G51E0.3(RET);(SUB 16)G4K0(RET);;;(SUB 1007)(P130=PPOSX,P131=PPOSY,P153=BLKN)(IF P108 LE 9.5 ANAO2=P108+0.5
来源：学生作业帮助网 编辑：作业帮 时间：2024/05/03 23:07:30
解释下激光切割程序%X2040D_SUB_V9.0.1 ,MX-O,; LASER :CP ROFIN PRC; DATE :SEP-09-2011;;(SUB 11)(P289=GS51)G5M16G90G0Z0(IF P289 NE 1 RET)G51E0.3(RET);(SUB 16)G4K0(RET);;;(SUB 1007)(P130=PPOSX,P131=PPOSY,P153=BLKN)(IF P108 LE 9.5 ANAO2=P108+0.5
解释下激光切割程序
%X2040D_SUB_V9.0.1 ,MX-O,
; LASER :CP ROFIN PRC
; DATE :SEP-09-2011
;
;
(SUB 11)
(P289=GS51)
G5
M16
G90G0Z0
(IF P289 NE 1 RET)
G51E0.3
(RET)
;
(SUB 16)
G4K0
(RET)
;
;
;
(SUB 1007)
(P130=PPOSX,P131=PPOSY,P153=BLKN)
(IF P108 LE 9.5 ANAO2=P108+0.5 ELSE ANAO2=10)
M20
(RET)
;
(SUB 1010)
(P152=1010)
(IF P107 LE 9.5 ANAO2=P107+0.5 ELSE ANAO2=10)
G73QP180
FP126M55M21M12
(RET)
;
(SUB 1011)
(P130=PPOSX,P131=PPOSY,P153=BLKN)
FP126M55
(ANAO1=P143)
SP231M3M23M10
(PCALL 9900,P3=P221,P5=P211)
(PLCMM199=1)
M20
M15
(IF P108 LE 9.5 ANAO2=P108+0.5 ELSE ANAO2=10)
(ANAO1=P142)
SP111M3M22
G4K20
(RET)
;
解释下激光切割程序%X2040D_SUB_V9.0.1 ,MX-O,; LASER :CP ROFIN PRC; DATE :SEP-09-2011;;(SUB 11)(P289=GS51)G5M16G90G0Z0(IF P289 NE 1 RET)G51E0.3(RET);(SUB 16)G4K0(RET);;;(SUB 1007)(P130=PPOSX,P131=PPOSY,P153=BLKN)(IF P108 LE 9.5 ANAO2=P108+0.5
我擦.这是子程序啊.这些是控制机床动作的,比如：出光,调功率,开气,关光,Z轴上升,等等的.
团结的机器嘛.