作业帮英语翻译1、在末尾加上“Y”后保存2,中途录入工时数3,将状态设置为【废弃】4,用相同的J/O #再次发布(release)5,按常规执行
来源：学生作业帮助网 编辑：作业帮 时间：2024/05/05 09:43:07
英语翻译1、在末尾加上“Y”后保存2,中途录入工时数3,将状态设置为【废弃】4,用相同的J/O #再次发布(release)5,按常规执行
英语翻译
1、在末尾加上“Y”后保存
2,中途录入工时数
3,将状态设置为【废弃】
4,用相同的J/O #再次发布(release)
5,按常规执行
英语翻译1、在末尾加上“Y”后保存2,中途录入工时数3,将状态设置为【废弃】4,用相同的J/O #再次发布(release)5,按常规执行
1.add letter "Y" to the end and then save.
2.input hours in the middle.
3.set status as "abort"
3.Release again with the same J/O #.
4.Execute per standard operation procedures (SOP).
1、在末尾加上“Y”后保存
Add "Y" to the end and then save.
2，中途录入工时数
Work hours on the midcourse input.
3，将状态设置为【废弃】
Set the status as "Abortion"
4，用相同的J/O #再次发布(release)
Release agai...
全部展开
1、在末尾加上“Y”后保存
Add "Y" to the end and then save.
2，中途录入工时数
Work hours on the midcourse input.
3，将状态设置为【废弃】
Set the status as "Abortion"
4，用相同的J/O #再次发布(release)
Release again with the same J/O #.
5, 按常规执行
Implement as per normal practices.
收起
1、At the end of plus "Y" after preservation
2、Midway entry man-hour number
3、Will state set to [abandoned].
4、Use the same J/O # republished (release)
5、According to conventional execution
1. Add 'Y' in the end, and save it.
2. Input the working hours in the middle way.
3. Change the status into 'Abort'
4. Release the same I/O # again.
5. Execute as usual.